My shiny car Best car shine reviews
Introuction
A muffler, also known as a silencer is mostly a device that is used to reduce the amount of noise/sound that is made by the exhausts of internal combustion system engines. The mufflers are usually installed within an exhaust system, although it is not designed to serve as any primary function of exhausts. The latter is also engineered in a way that it acts as an acoustic soundproof device mostly designed so as the decrease the noise of the sound pressure that is released by the engine. Most of the noise that is generated by the engine comes out of the car through the same pipe that is used by the mufflers. The mufflers works in such a way that the noise goes through a series of pipes and chambers that are tuned harmonically and thus causing a destructive interference where opposing sound waves can cancel each other. There are however sometimes some unavoidable sound effects which may decreased the engine efficiency due to the increase pressure onto the back of the muffler. Most car owners or even that of any vehicle will remove and install aftermarket mufflers and tune it so as to decrease fuel consumption as well as to reduce the effect of gases onto the environment.
Now that you know a bit about mufflers, let’s start reviewing those high flow mufflers below.
MBRP S5514BLK Muffler before Axle Black Coated
MBRP is one of the most trusted manufacturers around in terms of muffler and car equipment or accessories.
Pros and Cons
The pros of this high flow muffler firstly is that it is already coated in back power finish meaning you don’t have to worry about it rusting or even dry rusting. The muffler can also be relocated for maximum clearance and thus save you in fuel consumption and money over the course of a month. This is one of the chambered high flow mufflers that delivers one of the most powerful and clear sound which is pretty good to the ear. The cat back system also makes it great to use and install for muffler lovers.
As a matter of fact, we couldn’t find any inconvenience that could be considered as a con.
High Flow Pneumatic Steel Muffler 1-1/4″ NPT
Pneumatic Plus is another one of the well-known brands in terms of silencers or mufflers.
Pros and Cons
This high flow muffler or silencer is one of the best as it can support temperatures of 35F to 160F meaning it won’t break from those. It is also already coated in zinc and made from steel meaning it is rust and weather resistant and can take some beating if you are an avid driver and muffler fanatic. The high level of PSI (pound per square inch) makes it one of the most durable mufflers at 300. Overall it will also help in decreasing your fuel consumption on startup and over the long run will save you a lot of money. As a plus, Pneumatic plus also provides them in various sizes meaning you are pretty sure to find one that fits your exhaust.
As a matter of fact, we couldn’t find any huge inconvenience to be classified as con.
DynoMax 24254 Thrush Rattler Muffler
DynoMax is another one of the trusted and innovative brands whose products you can find easily everywhere.
Pro and Cons
This muffler is pretty good, solid and sturdy since it has been 100 percent welded, the latter done in heavy duty aluminum steel construction. As a result, it is extremely strong and can hold high degrees of temperature without cracking. Since it has also already been coated in black finish, it is resistant to different weather conditions as well as rusting. In addition to all of those, you can be pretty sure it is water resistant. We also found that you can adjust it to your liking since in default, it is designed to muffle and then produce a very aggressive sound.
As a matter of fact, for this one too, we couldn’t find any huge inconvenience so as to consider it as a con.
MBRP S5518409 Muffler before Axle T409 Stainless Steel
Another product from MBRP in this review meaning we know we are going to get a good quality and innovative product.
Pros and Cons
This muffler is one of the best and presents almost the same advantages of the MRBP one above in this review. In terms of sound, the high flow mufflers work perfectly and muffle then produce a clear sound that is sure to please your ears. The complete cat-back system also makes it ideal for your car exhaust. Already coated, this exhaust muffler is resistant to all kinds of weather as well as being rust resistant. The latter being made from heavy duty material works very well onto the toughest terrains as advertised. It is also possible to relocate the mufflers to get the maximum clearance needed. Overall it is a very good product.
As a matter of fact, we couldn’t find any inconvenience in this one too so as to consider it as a con.
Conclusion
Since we have reached the end of this review, it is about time we reveal the one we would most likely bet on in case we had to choose. However, before that, we should just inform you that even though we’ll be choosing one muffler from all of the above, it doesn’t mean that they others are bad or worse since there’re all pretty good. Remember that the exhaust you choose will depend on your taste, type and preferences and you’re free to come to your own conclusion.
Now without any further ado, the one we would most likely bet on is the High Flow Pneumatic Steel Muffler 1-1/4″ NPT. The reason for our choice is simple since it presents no cons in our eyes also it can stand high level of heat without cracking or breaking which is pretty good.