Home / Best undercover swing case review

Best undercover swing case review

Introduction

Best undercover swing case review

A storage box for a storing all your gear: tools, trailer accessories, jumper cables, sporting goods. Just about anything that is rolling around the truck’s cab or bed. To access the gear, just pull the release lever. You don’t have to reach over or climb onto the truck bed. The SwingCase, fashioned by Undercover Inc in North America, is an amazing and easy way to store your smaller consignments secure and accessible. The locking lid of the Undercover Swing Case Truck Bed Storage Box keeps your goods locked in your truck’s bed and on the move. You can remove and shift it storage box and take it anywhere. These truck bed storage boxes are made to order to fit your specific build and model flawlessly.

Undercover SC100D Black Swing Case Storage Box


https://www.amazon.com/Undercover-SC100D-Black-Swing-Storage/dp/B001B7TSSQ

A user can easily install the Swing Case to your truck’s side bed within 5-minutes with the help of the six screws that are self-tapping. These screws come along with the case. This toolbox is quite versatile and can hold anywhere close to 75 pounds of items. There are cup-holders too on top of the Swing Case. The user can also remove it completely if required, for maximum access to the truck bed. Since it is moveable, the users can easily take it along with them at their convenience.

The lid of the case is lockable which makes it safe and secure. The latch has a quick-release mechanism that allows it a 180-degree swing out which makes it more convenient to access the tailgate. When it is not in use, it swings back and locks itself secure. The case is well-sealed which does not allow any moisture to seep inside, keeping the goods dry and safe inside.

The tool-tray of the Swing Case is sliding which makes it convenient for organization. It offers a 3-inch gap from the truck’s bed and can be used along with hard, soft, rolling or folding tonneau covers. This lightweight case is made with the same strong ABS stuff as the UnderCover Tonneaus. The users can quickly install it within 10 minutes with the self-tapping screws which can be used along with a cordless drill.

The box is made of plastic and hence it is thin and raises concerns over its sturdiness and endurance. The box needs an inside cushioned liner of some sort to help protect tools and the box itself. Users might experience a box to bed wall frame latch issue, which a situation in which a user cannot re-latch the box back to the frame. Well, lubrication of the mechanism is needed to prevent further sticking.

Check price and availability here

Undercover SC300D Black Swing Case Storage Box


https://www.amazon.com/Undercover-SC300D-Black-Swing-Storage/dp/B001B7RS4M

A user can easily install the Swing Case to your truck’s side bed within 5-minutes with the help of the six screws that are self-tapping. These screws come along with the case. This toolbox is quite versatile and can hold anywhere close to 75 pounds of items. There are even cup holders on top of the case. The Swing Case is completely removable and portable which makes sure that the user can use the truck bed completely when required and they can also carry it along wherever they want, at work or play.

The lid on top can be locked which keeps your belongings secure. The latch has a quick-release mechanism that allows it a 180-degree swing out which makes it more convenient to access the tailgate. When it is not in use, it swings back and locks itself secure. The case is well-sealed which does not allow any moisture to seep inside, keeping the goods dry and safe inside.

The Swing Case offers great organization options with its sliding tool tray feature. Swing Case has a 3-inch clearance above the bed of the truck and works well with all types of tonneau covers: rolling, hard, soft, or folding. This lightweight case is made with the same strong ABS stuff as the UnderCover Tonneaus. The users can quickly install it within 10 minutes with the self-tapping screws which can be used along with a cordless drill.

The box can move back and forth when required and stays locked when it is not in use. It may not hold a tire iron of standard size but it can definitely hold some bungee cords, small toolkits, tow chain of upto 6 feet, jumper cable, ratchet straps or a small jack.

The case is perfect for those looking for some organized storage that they don’t want to stash under on the floor or under the seat. But there’s no drain plug to fill it with beer and ice unless they take it out of the truck.

Another point to note is that it cannot fit into the wasted space beside the truck bed as advertised. Though it does not jut out beyond the wheel space, it will definitely occupy some bare-minimal space.

Check price and availability here

Undercover SC201D Drivers Side Black Swing Case Storage Box


https://www.amazon.com/Undercover-SC201D-Drivers-Black-Storage/dp/B001B7TT1M

The Swing Case is an amazing tool box that can be fitted in 5 minutes to the side of the truck-bed. The 6 self-drilling screws that come along with it make the installation easy. It can hold all of 75-pounds of goods and comes with cup-holders on the lid top.

You can detach the case from the truck bed if you want to use it completely. It can also be moved to any place without any hassles. The lid can be locked keeping your belongings safe and secure inside. The latch can be released easily and the case can swing out to 180 degree providing complete access to the deck. It latches on to the lock and stays locked when not in use. The case is moisture-proof keeping your goods dry and safe and also has a convenient sliding tray that keeps your tools organized.

The Swing Case is made out of tough ABS material similar to the UnderCover Tonneaus which make it lightweight yet sturdy. You can use it along with all types of tonneau covers such as hard, soft, folding or rolling. It offers a 3-inch clearance over the truck’s bed. You can install it quickly within 10 minutes using the screws supplied and a cordless drill.

Even though instructions are given on how to install it provided that user has a bed-liner, it cannot be cut into the bed-liner as it is designed to be used without one.  The user will have to remove a significant portion of the bed-liner to install the Swing Case and also need long screws and a plastic piece to create some space inside.

Check price and availability here

Undercover SC300P Black Swing Case Storage Box, Passenger Side


https://www.amazon.com/Undercover-SC300P-Black-Storage-Passenger/dp/B001B7TT3K

It is very easy to install the Swing Case to your truck’s side. You can do it using the 6 self-tapping screws that come along with it in a matter of 6 minutes. This is a resourceful box that can carry almost 75 pounds of items or tools and it also comes along with cup holders on the lid top.

You can remove the case and take it along anywhere you want. You can also lock it up for safety. The case has a quick-release latch that lets it swing out 180 degrees which makes it easier to access the tailgate. The latch gets locked when not being used. The container does not let moisture to seep in and keeps the items dry and safe.

The sliding tray that comes along with the Swing Case makes it perfect for organized storage. There’s a 3-inch gap between the case and the truck bed which makes it compatible with all types of soft, folding, hard, or rolling tonneaus. This tough and lightweight case is made of tough ABS material used to make the UnderCover Tonneaus. You can install the whole thing in a matter of 10 minutes using your cordless drill and the screws supplied along with the case.

In case you have a bed-liner, you may have to cut the box to set up the case. So take a call only if you want to cut your liner that you are already using. The rope cleat can probably be used to mounting the bracket. The case is made out of plastic which makes it feeble and thin.

Check price and availability here

Undercover SC400D Black Swing Case Tool Box


https://www.amazon.com/Undercover-SC400D-Black-Swing-Storage/dp/B001B80CX0

The Swing Case is an amazing toolbox that can hold around 75 pounds of tools or other goods which can be easily installed on your truck bed’s side within 5 minutes. It comes with self-tapping screws (6 nos) that lets you easily install it. The cup-holders on top of its lid make it very convenient when you are travelling. The case can be detached and carried anywhere as required.

The lid can be locked which ensures safety of your belongings. The latch releases quickly to move the Swing Case 180 degree which clears up ample space on the truck bed. It latches on to the side of the truck bed when not in use. The container remains moisture-free keeping the belongings dry and safe.

You get a 3-inch gap between the bed and the case which lets it sit on all types of  hard, soft, folding or rolling tonneau covers. The sliding tool tray is another interesting option for organized storage. The case is made out of tough ABS material used to make UnderCover tonneau, making it tough and weightless. Use your cordless drills along with the screws supplied to quickly install the Swing Case in 10 minutes.

The loop supplied to lock does not come along with a lock. So the users have to buy and use their own lock to make sure they lock the case securely on the pins or else it can be carried away! So you need to keep 2 keys, one for the lid and the other for the loop, to keep the case secure.

Even though a slight design change would have allowed the box to be locked on to the pin and the lid using a single locking system, it has been overlooked. The company can offer to sell a single lock to manage the lid and the case together to make a little more money while keeping the case secure easily.

Check price and availability here

<>